Dodge Front '02 2500 & 3500 Models
2002 Models need to check for Vent tube on face of cover
If you have a Vented cover this is the correct cover.
Capacity: 4 1/2 Quarts
Includes: Bolt kit, Drain Plug and Dip Stick.
Part Number: DANA #60-DF
Overall height 3 5/8"
Dodge Front '89 to '02 2500 & 3500 Models
2002 Models need to check for Vent tube on face of cover
If you have a Vented cover just make note in comment section for correct cover.
Capacity: 4 1/2 Quarts
Includes: Bolt kit, Drain Plug and Dip Stick.
Part Number: DANA #80
Overall height 4 1/8
Dodge '94 to '02 - 2500 / Five speed trucks
Dodge '94 to '02 3500 all trucks
Attention 4X2 Owners: You will need sway bar brackets with this cover. The part number is #80100 and it is $12.00.
Includes: Bolt kit, Drain Plug and Dip Stick.
Capacity: 8 Quarts
Part Number: DANA #70
Overall height 4 1/8"
Dodge Pre. '94 to '02 2500 & 3500 trucks
Dodge '94 to '02 3500/Automatic trucks
Includes: Bolt kit, Drain Plug and Dip Stick.
Capacity: 6 Quarts
Part Number: AA14-9.25
Dodge 03 to present 2500/3500
Standard Diesel and High Output / Gas Engines
*Lube Locker Custom Made Reusable Gasket
Includes: Bolt kit, Drain Plug and Dip Stick.
Capacity: 4 Quarts
A word of caution: This cover works perfectly on 90% of Dodge Trucks. Due to stack tolerances differing from one truck to the next, some modification could be required to clear all steering components. Be extra attentive to fitment and clearance prior to install.
Please verify axle before ordering
Part Number: AA14-10.5
Dodge Rear 2003 to present
2500 / Automatic Gas Trucks
Dodge Rear 2003-2005 Standard Output Diesel
Bolt Pattern has two top and bottom bolts @ 11:00 & 1:00 O'clock & 7:00 & 5:00 O'clock for quick identification.
OR #AA 14-11.5 Bolt Pattern has one top and one bottom bolt @ 12:00 O'clock & 6:00 O'clock for quick identification.
Includes: Bolt kit, Drain Plug and Dip Stick.
Capacity: 6 Quarts
Part Number: AA14-11.5
Dodge Rear 2003 to present
High Output Diesels 2500 & 3500 trucks
This cover is the correct cover for your 14 bolt - 11.5" differential, even though there are only 12 bolt holes. The top and bottom bolts have been removed for drain plug and temperature sending unit hole.
Bolt Pattern has one top and one bottom bolt @ 12:00 O'clock & 6:00 O'clock for quick identification.
Includes: Bolt kit, Drain Plug and Dip Stick.
Capacity: 8 Quarts
Please verify axle before ordering